Belting Range Chapter 3 - Rubber Belts

In this chapter, we will introduce the following 4 type of belts
- Wide Angle Belt
- VS Belt
- Rubber Timing Belt
- HTD Belt


Wide Angle Belt










Introduction

Wide angle belts are excellent to use for high speed smooth drives where it is necessary to reduce vibration. Wide angle belts are oxidization proof and heat resistant therefore it will enhance transmission efficiency, abrasion resistance as well as product life span. Defectives such as harden, cracked when in high temperature environment and belt inside-out are being minimized.

Applications

• Cooling tower systems
• Machine tools

VS Belt










Introduction

Variable speed belts are intended for use with variable speed pulleys to gain a wide range of driven speeds. The cog design gives greater flexibility which helps in efficient heat dissipation thus prolonging the life span of the belt. Variable speed belts are high heat and oil resistance.

Applications

• Tow stroke
• Four-stroke air cooling
• Water cooling motorcycle
• Transmission system
• Industrial variable speed transmission
• Agriculture machinery

Rubber Timing Belt










Introduction

Rubber timing belts are design with neoprene body to provides protection against grime, oil and moisture. The nylon tooth facing provides durable wear surface for longer life span of belt.

Applications

• Agriculture
• Construction
• Mining
• Forestry
• Manufacturing industries
• Car industries

HTD Belt










Introduction

HTD belts have a larger, more robust tooth profile for increased capacity. The fiberglass tensile cord provides high strength, excellent flex life, and high resistance to elongation. The belt is resistance to grime, grease, oil and moisture.

Applications

• Food processors
• Manufacturing industries
• Medical Diagnostic
• Vending machines
• Vacuum cleaners
  

Belting Range Chapter 2 - Rubber Belts

In this chapter, we will introduce the following 4 type of belts
- Banded Belt
- Automotive Belt
- Double V Belt
- Power Rib Belt


Banded Belt










Introduction

Banded belts helps eliminate belt whip and turnover compared to conventional belt drives. It assures high lateral rigidly, guiding the belt in a straight line & preventing it from coming off the drive, even under severe shock loads. The concave sidewall of the belt provide proper cord support & full contact with the sheave-groove for equal loading & uniform wear. Strongly bonded belt which results in equal load distribution & absorption of bending stress without cord deterioration thus prolonging belt life.

Applications

• For industrial machinery with pulsating/shock loads. e.g. Crushers, compressors & etc
• Drives in which the natural vibrations of a belt set may have an adverse effect on the operation of machine. e.g. Lathes, cutters & grinders

Automotive Belt










Introduction

The molded cog on automotive belts help to increases flexibility & have higher load capacity. These belts have technically good design to high wear & deformation resistant. They are oil and heat resistant.

Applications

• Agriculture harvester
• Motorbike
• Outdoor power equipments
• Cars

Double V Belt










Introduction

Double V belts has been extensively used for power transmission on machinery & equipment V belt adapts to the requirements of heavy power, high speed, long lifetime, small distortion & small space occupation. They are anti-static and have long lifetime which reduces number of replacement & maintenance cost.

Applications

• The double V profile of the belt makes it suitable for drives with an S-bend and in which both sides of the belt have to be used for transmitting power. This type of drive is especially used in textile & agricultural machinery.
  

Power Rib Belt










Introduction

Power Rib Belts are extremely flexible and capable to work on small pulley diameters & serpentine drives.The Trapezoid faced ribs on a fibre reinforced matrix of base gives higher power transmission. They offers less vibrations, absorb shocks, low stretch & excellent behavior under tension. They are oil & heat resistant offering long service life & resistant to wear & tear and facilitate quiet running of the equipment.

Applications

• Work tools such as harvester combines, power driven sprayer and engine
• Machine tools such as NC lathes, mill, drill & grind machine
• Broadcasting equipment drives & hovercrafts
• Compact drives with high speed ratios
• For drives requiring minimum maintenance & noise-sensitive environment
  
• For serpentine drives, V-flat drives and drives with reverse bend idler
  

Belting Range Chapter 1 - Rubber Belts

Uni-Drive Systems have a wide range of belting that ranges from rubber to thermoplastic. In each chapter, it will introduce 4 different type of belts to let users have a better understanding of each type of belt's characteristic & application.

In this chapter, we will introduce the following 4 type of belts
- Classical V Belt
- Cogged Classical Belt
- Wedge Belt
- Cogged Wedge Belt

Classical V Belt

Introduction

Classical V-Belts are endless belts used in a wide range of applications. These belts have technically good design and are economical for most ordinary drives. They are anti-static, oil and heat resistant. Classical V-belts are built with high strength, specially treated polyester cord that gives the capacity to carry more horsepower. Ultra high strength polyester cords assure fatigue resistance and length stability. Each cord is chemically treated to bond to the insulation and compression sections, welding all components together for long service life & also give superior resistance to shock load.

Applications

• Compressors
• Crushers
• Motors
• Agricultural Machineries

Cogged Classical Belt










Introduction

Cogged Classical Belts are anti-static and highly oil resistant while having the ability to handle a wide temperature range. These belts carry a high quality Polyester cord core with Chloroprene used in insulation rubber. Cogged Classical Belts provide a superior combination of flexibility and load carrying capacity, as well as less stretch resulting in less maintenance. Flexible Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration. Belt Edge is machined for even sheave groove contact resulting in less slip and wear.

Applications

• Vertical Shaft Drives
• V-flat Drives
• Agricultural Drives
• Conveyor Systems
• Crusher, Compressors, Generators Sets, Pumps, Etc

Wedge Belt










Introduction

Wedge Belts are made of specially compounded synthetic rubber to give superior oil, heat resistant and static conducting properties, thus providing advantageous and safer drives in hazardous atmospheres. Wedge belts can transmit up to 3 times the horsepower compared to classical V-Belts. This results in being able to use a narrower sheave width with increased performance. Vertical curves provide proper cord support and adequate contact with the sheave-groove for uniform loading bearing, uniform abrasion resistance, and increased belt service life. Flex-Bonded Cords are strongly enforced into the body of the belt resulting in equal load distribution and absorption of bending stress without cord deterioration.

Applications

• Universally used in industrial and agricultural machinery such as large sized pumps, crushers, etc.

Cogged Wedge Belt










Introduction

Cogged Wedge Belts are anti-static and highly oil resistant while having the ability to handle a wide temperature range. Flexible Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration. High modulus and low stretchy tensile cords engineered to support higher loads without stretching while ensuring high power rating.

Applications

• Emphasizing in heavy-duty industrial drives with high belt speeds. Allow immediate improvement of existing drives which use wrapped belts, providing overall benefits with regards to economy as well as power transmission and reliability of operation.
  

Range Of Products

Uni-Drive Systems have a wide range of product ranging from industrial to automotive. Each and every product is being categorized into more than a thousand sizes & each size have its own type as well. We also provide customization & fabrication based on our customer requirement & needs.

Below are some categories of our products

BELTING

PULLEY









COUPLING









SPROCKET

CHAIN

LOCKING DEVICE

MOTOR

GEAR BOX

GEAR

CLUTCH & BRAKE

OTHERS

Operation Hours & Location

Uni-Drive Systems provides a comprehensive range of power transmission products to meet all your industrial needs. We provide consultation to our customer to help them with their queries & requirements. To serve our customer better, we provide 24 hours services.

We are located at 19, Pioneer Sector 2, Singapore 628379.

You may refer to the map below



You can contact us at
Tel : (65) 68612340, Fax : (65) 68610403
Email : unidrive@singnet.com.sg


For 24 hours service, you can contact our engineer

Bernard H/P : 94555912

Edwin H/P : 94555913
Alvin H/P : 94555289


For more information, you can go to our website at www.uni-drive.com

Uni-Drive Systems

Company Profile

Uni-Drive Systems is one of the leading suppliers, as well as manufacturers of high quality mechanical power transmission products in Singapore. Founded in 1987 by a group of experienced engineers, the company eventually grew to become a leading pioneer in the power transmission industry. Our company provides a full range of mechanical Power Transmission Products on couplings, pulley drives, beltings replacement, brake lining, mechanical transmission parts replacement, etc. Uni-Drive not only supplies its products and expertise to the general industries, it also has a broad customer base in the Oil and Gas, Marine, Offshore industries. With its huge success in Singapore, our company then expanded our business into other regions with many branches all over Malaysia and Indonesia.

In Malaysia, Uni-Drive successfully established its first overseas branch in Kuala Lumpur, the capital city in 1994. Over these years, Uni-Drive has been able to expand rapidly in Malaysia with a current total of 11 branches there.

Uni-Drive next established their first overseas branch in Jakarta, Indonesia in 1996. Today, Uni-Drive has a total of 3 branches in Indonesia with the other two in Surabaya, Java, and Medan, Sumatra.

Besides its comprehensive regional branch office and factory coverage in Malaysia and Indonesia, Uni-Drive also has its share in the international market. Our company exports high quality power transmission products all over the world; America, Latin America, Europe, Asia Pacific and etc.

Uni-Drive's success lies in the modern management technique applied to all aspects of the business. Its approach to sales, which centers on supplying engineering excellence, superior product range and availability, quality brand marketing and "customers first" service, coupled with its rich experience in marketing brings Uni-Drive brands to the market as the premium choice for quality supply of power transmission products. With the full strength of about 50 employees working together under the management of western trained leadership, Uni-Drive has been able to constantly provide and improve its products and customer service.

Besides its management excellence, Uni-Drive has several strong aspects, which allows the company to strengthen its customer base, capture and retain a huge part of the market share in power transmission industry. Among the key aspects is brand promotion, supply capacity, engineering excellence and customer service.

The Uni-Drive brands and its distributors are supported in the market place by a variety of advertising and promotional activities. Uni-Drive promotes the Uni-Drive brands and keep ourselves informed of the latest developments in the market. It also develops a variety of promotional materials. Quality advertisements are placed regularly in leading industrial magazines. Brochures are printed and supplied to distributors for the purpose of promoting the features of individual product lines. Finally, Uni-Drive provides a comprehensive catalog that is a vital tool for distributors in promoting and supplying information about the Uni/Uni-Drive production lines.

One of the greatest strengths of the Uni-Drive is its wide range of products. All sizes required by industries worldwide are available with no manufacturing lead-time from Singapore central warehouse. With its range of products available ex-stock, Uni-Drive is able to meet the demands for power transmission products in the competitive market.

Engineering excellence from suppliers lies at the heart of Uni-Drive's ability to provide to the market an extensive and ever increasing range of quality power transmission products. Uni-Drive is continually expanding its product range to include new lines and sizes required by end-users. Our engineering team's familiarity with the full range of power transmission products applications ensures that Uni-Drive will bring the right products to the right markets. its manufacturing experience ensures that new products will conform to international standards as soon as they are introduced to the market place. Finally, Uni-Drive has extensive own in-house and subcontracting capacity to supply made to order requirements.

In the service package offered to its customers, Uni-Drive has just one objective; to be easy and efficient to do business with. Distributors will find it easy to communicate with Uni-Drive, easy to place orders, easy to seek information and easy to obtain quotations for potential new business. The staff in the Uni-Drive sales office is dedicated to communicating with and servicing international customers.

Insights

In the service package offered to our customers, Uni-drive has only one objective in mind. That is to be easy and competent when it comes to business. Its aim is to provide a smooth communication with distributors, hassle-free order placements, ease in seeking information and when it comes to obtaining quotations for potential new business, effortless. The staff in the Uni-drive sales office are dedicated and passionate in communicating and assisting international customers.

The sales department can be contacted by phone , fax, email or via the Uni-drive website. Enquiries are welcomed and will be addressed quickly and thoroughly. Orders can be received via fax or email, are processed, packed and shipped promptly, and customers are provided with timely and useful information regarding the collection of freight consignments.

To serve our customer better, we provide 24 hours service to our customer as they might have last minute or late hours requirement of products or services.

We value our customers and our goal is to serve them better each and every time. Do contact us if there is any enquiry. We will be more than willing to assist you.